Flat Seal is designed to seal
• Tread punctures
• Bead leaks
• Rim leaks
• Porosity
• Tube, tire or wheel-related leaks
Flat Seal has a revolutionary chemical structure that causes this tire enhancer to continuously remain fluid so that it will immediately fill and seal any hole (up to 1/4") in the tread area where air can escape from the tire.
Because of this, Flat Seal tire life enhancer gives you the benefit of much longer tire life coupled with less downtime and lower maintenance costs. Additionally, you will receive savings from maintaining proper air pressure.
Characteristics of Flat Seal
This space-age product combines an ethylene-glycol based solution with natural fibers, artificial fibers, adhesion agents, drying agents, corrosion inhibitors, and other solids.
It is designed to keep the fibers and solids in constant suspension. Because there is no settling of the solids and fibers, Flat Seal tire life enhancer is always ready to work for you -- no mixing, stirring, or other preparation is necessary.
The adhesion properties in Flat Seal tire life enhancer -- coupled with the fact that it remains fluid when installed in the tire -- provides constant protection for all parts of the tire. Aerosol inflators provide temporary fixes at best.
Flat Seal is ready for use. NO mixing or special preparation is required. In fact, Flat Seal's formulation is non-toxic, non-flammable, and environmentally friendly. So much so, that it even meets the requirements of the California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65).
Flat Seal also does not void tire manufacturer warranties or affect wheel balance if properly installed.
Product Features
-
Completely ready to use. No mixing, shaking, or tire preparation needed.
Increases tire life, tires run cooler.
Clean and simple, just rinse with water.
Instantly and permanently seals punctures up to 1/4" in diameter.
Also seals bead leaks, rim leaks, valve leaks, etc.
Prevents air loss due to natural rubber porosity.
-
Is installed quickly and easily through the valve stem. Average installation time is just minutes per tire.
Good for all seasons. Flat Seal will not freeze.
Effective from -45 to +300 degrees Fahrenheit.
Will not harden in the tire.
Contains three rust inhibitors and will not rust rims, steel belts, or valve stems.
Works great on aluminum wheels.